Swing Door
Thermally broken aluminum · inswing or outswing · single door or a pair with a center lock
The system
A thermally broken aluminum patio and entry door on the Select profile. Inswing or outswing, specified at order, single or as a pair, with Roto multipoint locking, a Coastal 316 stainless handle and a low threshold in matching finish.
Construction
| Frame depth | To be confirmed |
| Thermal break | Polyamide, 15/16″ (24 mm) |
| Profile wall | 2.0 mm |
| Opening | Inswing or outswing, specified at order |
| Finish | AkzoNobel Interpon powder coat, AAMA 2604; 2605 and dual-color to order |
| Hardware | Roto multipoint locking; Coastal 316 stainless handle |
| Threshold | Low, in matching finish |
| Screen | Retractable screen available |
Performance
Calculated whole-window values with T40 Low-E glass; not NFRC listed. Meets IECC Climate Zone 2 (U ≤ 0.40, SHGC ≤ 0.25): San Antonio, Austin, Houston, Corpus Christi. NFRC-certified product is specified in the Reserve collection.
Sizes
| Inches | Millimeters | |
|---|---|---|
| Max leaf width | 39 1/4″ | 1000 |
| Max leaf height | 110 1/8″ | 2800 |
| Min leaf width | 23″ | 584 |
| Min leaf height | 70″ | 1778 |
| Max leaf weight | To be confirmed | |
Reference sizes, width × height, measured to the outside of the frame, excluding the nail fin. Every Select unit is built to the opening on the drawings.
Glazing
| Standard | 6 mm T40 Low-E + 12 mm argon + 6 mm |
| Unit | 15/16″ (24 mm) insulating glass |
| Glass | Tempered, every lite |
Configurations
Finish
AkzoNobel Interpon powder coat, AAMA 2604, inside and out. Custom colors, AAMA 2605 and dual-color frames (a different color inside and outside) at an additional charge.
How a Select unit is ordered
Profile sections
Drawn from the current Select production profile drawings. Profile dimensions are in the table alongside.
Reading the section
Profile, gasket and glazing dimensions are issued with the approved shop drawings.
Glazing make-up
| Outer lite | 1/4″ (6 mm) T40 Low-E |
| Cavity | 1/2″ (12 mm) argon |
| Inner lite | 1/4″ (6 mm) |
| Unit | 15/16″ (24 mm) insulating glass |
| All lites | Tempered |
Installation
| Nail fin | Integral, 4 sides, standard; setback selectable per order to suit the cladding |
| Drainage | Weep slots at the sill |
Also in Select
| Fixed window | Picture and mulled units |
| Casement | Outswing, single or pair |
| Awning | Top hinged, push-out |
| Sliding window | 2-track or 3-track |
| Window wall | Data sheet to follow |
| Sliding door | Data sheet to follow |
Thermal values for this non-certified collection are the manufacturer’s calculated whole-window figures and carry no NFRC listing. NFRC-certified product is specified in the Reserve collection.