Casement
Thermally broken aluminum · outswing, push-out operation · single or pair
The system
A thermally broken aluminum casement on the Select profile. The sash is side hinged, pushes out and opens to 90°, with Roto locking hardware and a Coastal 316 stainless handle. Single sash or a pair with a center lock.
Construction
| Frame depth | 2 5/8″ (66 mm) frame; 3″ (76 mm) sash |
| Visible frame | 4 5/16″ (109.5 mm), frame + sash per side |
| Thermal break | Polyamide, 15/16″ (24 mm) |
| Profile wall | 2.0 mm |
| Opening | Outswing, side hinged; opens to 90° |
| Finish | AkzoNobel Interpon powder coat, AAMA 2604; 2605 and dual-color to order |
| Hardware | Roto locking; Coastal 316 stainless handle. Sashes over 23 5/8″ (600 mm) wide use door-type hinges |
| Screen | Retractable screen available |
Performance
Calculated whole-window values with T40 Low-E glass; not NFRC listed. Meets IECC Climate Zone 2 (U ≤ 0.40, SHGC ≤ 0.25): San Antonio, Austin, Houston, Corpus Christi. NFRC-certified product is specified in the Reserve collection.
Sizes
| Inches | Millimeters | |
|---|---|---|
| Max width | 42″ | 1067 |
| Max height | 95 7/8″ | 2438 |
| Min width | 19″ | 483 |
| Min height | 22″ | 559 |
| Max sash weight | To be confirmed | |
Reference sizes, width × height, measured to the outside of the frame, excluding the nail fin. Every Select unit is built to the opening on the drawings.
Glazing
| Standard | 6 mm T40 Low-E + 12 mm argon + 6 mm |
| Unit | 15/16″ (24 mm) insulating glass |
| Glass | Tempered, every lite |
30″ × 44″ (762 × 1118 mm)
36″ × 35″ (914 × 889 mm)
Configurations
Finish
AkzoNobel Interpon powder coat, AAMA 2604, inside and out. Custom colors, AAMA 2605 and dual-color frames (a different color inside and outside) at an additional charge.
How a Select unit is ordered
Profile sections
Drawn from the current Select production profile drawings. Profile dimensions are in the table alongside.
Reading the section
Profile, gasket and glazing dimensions are issued with the approved shop drawings.
Glazing make-up
| Outer lite | 1/4″ (6 mm) T40 Low-E |
| Cavity | 1/2″ (12 mm) argon |
| Inner lite | 1/4″ (6 mm) |
| Unit | 15/16″ (24 mm) insulating glass |
| All lites | Tempered |
Installation
| Nail fin | Integral, 4 sides, standard; setback selectable per order to suit the cladding |
| Drainage | Drainage slots with covers |
Also in Select
| Fixed window | Picture and mulled units |
| Awning | Top hinged, push-out |
| Sliding window | 2-track or 3-track |
| Swing door | Inswing or outswing, single or pair |
| Window wall | Data sheet to follow |
| Sliding door | Data sheet to follow |
Thermal values for this non-certified collection are the manufacturer’s calculated whole-window figures and carry no NFRC listing. NFRC-certified product is specified in the Reserve collection.