Product Data Sheet

Core · Non-certified · October 2026

Windows

Sliding Window

CD-30 thermal-break aluminum · two panels or three tracks, middle opening · rollers · retractable interior screen

The system

A thermally broken aluminum sliding window on the CD-30 platform, the same profile as the Core sliding door. Two panels on two tracks, or three tracks opening at the middle. Panels run on rollers, and the retractable screen sits inside.

Construction

Frame depth	approx. 4 1/4 in (108 mm)
Tracks	Two-panel (2-track) or 3-track
Profile wall	2.0 mm, 6063-T5
Thermal break	Polyamide
Finish	AkzoNobel Interpon powder coat, AAMA 2604; 2605 and dual-color to order
Hardware	CMECH; rollers
Screen	Retractable, interior; priced separately
Drainage	Weep system at the sill

Performance

0.40

U-factor

0.22

SHGC

0.59

Manufacturer’s whole-window values, not NFRC listed. Meets IECC Climate Zone 2 (U ≤ 0.40, SHGC ≤ 0.25): San Antonio, Austin, Houston, Corpus Christi.

Sizes — per panel

	Inches	Millimeters
Max panel width	55″	1400
Max panel height	120″	3048
Min panel size	To be confirmed
Max panel weight	370 lb	168 kg
Max glass, one panel	45.2 sq ft	4.2 m²

Reference sizes. Larger sizes on request, confirmed case by case.

Configurations

Two panel · 2-track

3-track, middle opening

Glazing

Standard	5 mm Low-E double silver + 20 mm argon + 5 mm
Glass	Tempered, every lite; thickness steps up with lite size

Egress — smallest frames

Two panel
46 1/2″ × 45 1/4″ (1181 × 1147 mm)
75″ × 28 1/4″ (1902 × 715 mm)

Three track, two panels open
35″ × 45 1/4″ (886 × 1147 mm)
56 1/4″ × 28 1/4″ (1427 × 715 mm)

Overall frame sizes. IRC R310: 5.7 sq ft clear, 20″ minimum clear width, 24″ minimum clear height. Two panel: clear W = W/2 − 82.5 mm, clear H = H − 105 mm. Three track: clear W = 2W/3 − 82.5 mm.

Finish

Matte Black

White

Dark Bronze

AkzoNobel Interpon powder coat, AAMA 2604, inside and out. Custom colors, AAMA 2605 and dual-color frames (a different color inside and outside) at an additional charge.

How a Core unit is ordered

Send the schedule

The window and door schedule or a takeoff with opening sizes, the elevations so mulled runs price as assemblies, and the finish inside and out.

Approve the drawings

Shop drawings are issued for every opening and signed before any aluminum is cut.

Production and delivery

30 to 40 days production, then about 30 days ocean transit to the warehouse.

ARI MATERIALS · 5900 Balcones Drive, Suite 100, Austin, Texas 78731

(480) 882-8815 · ari-materials.com

Profile Sections

Core · CD-30 Series Sliding Window · October 2026

Windows · Sliding Window

Profile sections

Drawn from the production die. CD-30 profile — 3-track section shown. All dimensions in millimeters.

Plan section

Head & sill — vertical

Reading the section

160Frame depth of the 3-track section shown

108Two-panel (2-track) frame depth, approx.

45Head frame face

Remaining figures on the sections are internal profile and gasket dimensions, issued with the approved shop drawings.

Glass thickness by pane area

Each lite	Pane, sq ft	Pane, m²
5 mm	up to 26.8	0.09–2.49
6 mm	26.9–43.0	2.50–3.99
8 mm	43.1–64.5	4.00–5.99

Installation

Nail fin	Integral, 4 sides; setback per order
Drainage	Weep system at the sill
Hardware	Rollers
Screen	Retractable, interior; a separately priced line

Core — limited warranty

Frame, sash, welds10 years

Insulating glass seal10 years

Finish — AAMA 260410 years

Hardware and screens3 years

Also in Core

Fixed	CF-20 Series
Casement & awning	CS-20 Series
Tilt & turn	CT-20 Series
Sliding door	CD-30 Series
Multi-slide	CD-40 Series

Sections are supplied for detailing only and are not shop drawings. Approved shop drawings are issued for every order before manufacturing.

Thermal values for this non-certified collection are manufacturer’s calculated whole-window figures and carry no NFRC listing. NFRC-certified product is specified in the Reserve collection.

ARI MATERIALS · 5900 Balcones Drive, Suite 100, Austin, Texas 78731

(480) 882-8815 · ari-materials.com