Product Data Sheet

Core · Non-certified · October 2026

Windows

Awning

CS-20 thermal-break aluminum · top-hung, outswing · retractable interior screen

The system

A top-hung thermally broken awning on the CS-20 platform. The sash projects outward from the head, so it ventilates in rain and sits above a counter, a vanity or a fixed lite without obstructing the opening.

Construction

Frame depth	110 mm (4-5/16″)
Frame face	47.5 mm
Sash face	72 mm
Profile wall	2.0 mm, 6063-T5
Thermal break	Polyamide struts, 22 mm
Finish	AkzoNobel Interpon powder coat, AAMA 2604; 2605 and dual-color to order
Hardware	CMECH multipoint lock; 70 kg stays
Screen	Retractable, interior
Drainage	Slots with covers
Opening angle	70°

Performance

0.37

U-factor

0.23

SHGC

0.55

Manufacturer’s whole-window values, not NFRC listed. Meets IECC Climate Zone 2 (U ≤ 0.40, SHGC ≤ 0.25): San Antonio, Austin, Houston, Corpus Christi.

Sizes

	Inches	Millimeters
Max width	33 3/8″	850
Max height	70 3/4″	1800
Min width	19 3/4″	500
Min height	23 5/8″	600
Max sash weight	154 lb	70 kg
Max glass	16.4 sq ft	1.53 m²

Sizes are sash dimensions and reference sizes. Larger sizes on request, confirmed case by case.

Glazing

Standard	5 mm Low-E double silver + 20 mm argon + 5 mm
Glass	Tempered, every lite, every size

Not an egress unit

Ventilation only

The awning is specified as a ventilation unit and is not offered as an egress window. Bedroom openings are served by a casement or a sliding window.

Every awning in the Core collection glazes at 5 mm. The 6 and 8 mm bands apply to large fixed and sliding units.

Configurations

Awning

Awning over fixed

Two lites

Mulled run

Finish

Matte Black

White

Dark Bronze

AkzoNobel Interpon powder coat, AAMA 2604, inside and out. Custom colors, AAMA 2605 and dual-color frames (a different color inside and outside) at an additional charge.

How a Core unit is ordered

Send the schedule

The window and door schedule or a takeoff with opening sizes, the elevations so mulled runs price as assemblies, and the finish inside and out.

Approve the drawings

Shop drawings are issued for every opening and signed before any aluminum is cut.

Production and delivery

30 to 40 days production, then about 30 days ocean transit to the warehouse.

ARI MATERIALS · 5900 Balcones Drive, Suite 100, Austin, Texas 78731

(480) 882-8815 · ari-materials.com

Profile Sections

Core · CS-20 Series Awning · October 2026

Windows · Awning

Profile sections

Drawn from the production die on the CS-20 Series platform. All dimensions in millimeters.

Plan section

Head & sill — vertical

Reading the section

110Frame depth at head, jamb and sill

47.5Frame face — the frame sightline

72Sash face on the operable leaf

Remaining figures on the sections are internal profile and gasket dimensions, issued with the approved shop drawings.

Glass thickness by pane area

Each lite	Pane, sq ft	Pane, m²
5 mm	up to 26.8	0.09–2.49
6 mm	26.9–43.0	2.50–3.99
8 mm	43.1–64.5	4.00–5.99

Installation

Nail fin	Integral, 4 sides; setback 7/8″–1-3/8″ per order
Drainage	Slotted weeps with covers at the sill
Opening angle	70°

Core — limited warranty

Frame, sash, welds10 years

Insulating glass seal10 years

Finish — AAMA 260410 years

Hardware and screens3 years

Also in Core

Fixed	CF-20 Series
Casement & awning	CS-20 Series
Tilt & turn	CT-20 Series
Sliding window	CD-30 Series
Sliding door	CD-30 Series
Multi-slide	CD-40 Series

Sections are supplied for detailing only and are not shop drawings. Approved shop drawings are issued for every order before manufacturing.

Thermal values for this non-certified collection are manufacturer’s calculated whole-window figures and carry no NFRC listing. NFRC-certified product is specified in the Reserve collection.

ARI MATERIALS · 5900 Balcones Drive, Suite 100, Austin, Texas 78731

(480) 882-8815 · ari-materials.com